Garage Door Repair
Help with doors that will not open, will not close, make noise, or have stopped working the way they should.
Off-Track Garage Door Repair in Murfreesboro, TN
Door off its track, jammed, or leaning? Do not force it. Call to speak with a garage door specialist about off-track repair.
A garage door runs on two vertical tracks and two horizontal tracks, guided by rollers. When a roller leaves its track — or the track itself bends — the door can jam, lean, or stop moving entirely. An off-track door is one of the more visible garage door problems, and it is also one of the ones where forcing the door makes things worse.
This website helps homeowners connect with independent local contractors who can re-seat an off-track door and find out why it came off in the first place. We do not perform the work ourselves.
Common signs you need off-track door repair
An off-track door is usually obvious. These are the signs to look for.
- The door leans to one side or looks tilted in the opening
- A roller is visibly outside its track
- The door jams or sticks partway up or down
- A scraping or grinding sound as the door moves
- The door will not close fully, leaving a gap at the bottom
- A bent or dented section of track
What usually causes this problem
The most common cause of an off-track door is an impact: a vehicle brushing the door, a bicycle or ladder falling against it, or the door being driven into while it was still closing. But a door can also come off its track without any impact. Worn rollers can wobble and climb out of the track, a broken cable or spring can let one side of the door drop, and a track that has worked loose from the wall can shift just enough for a roller to escape.
Once a roller is out, running the opener usually makes the problem worse: the opener keeps pulling, the door twists, and the track can bend further. That is why the first rule with an off-track door is to stop using it.
How the problem is usually fixed
A contractor will first secure the door so it cannot fall, then inspect the tracks, rollers, cables, and springs to find the underlying cause. Re-seating the door involves guiding the rollers back into the tracks, straightening or replacing any bent track sections, replacing worn rollers, and re-tightening the track brackets.
Simply pushing the door back into place without fixing the cause will usually lead to the same problem again, so the inspection matters as much as the repair. After the door is back on track, the contractor will run it through full cycles to confirm it moves smoothly and sits level, and will check the opener's force settings so it stops if it meets resistance.
Safety first: garage door springs are under high tension. Do not attempt to repair a spring or cable yourself, and do not force a door that is stuck, crooked, or off its track. Leave the door where it is, unplug the opener if it keeps trying to run, and call for service assistance.
What to expect when you call
When you call, describe how the door looks — whether it leans, whether you can see a roller out of the track, and whether the door is open or closed. If you know what caused it, such as a vehicle impact, mention that too. Do not try to push or lift the door back into place yourself: a door that is partly off its track can fall without warning. Leave it where it is and call for service assistance.
How it works
- Call. Call (615) 845-8263 and describe the problem in your own words.
- Describe the problem. Note what the door does, what it sounds like, and whether it is open or closed.
- Connect with a contractor. We help connect you with an independent local contractor.
- Discuss next steps. The contractor discusses the repair or installation with you and arranges a visit if needed.
Related services
Garage Door Installation
New garage door installation for homes in Murfreesboro, including insulated and carriage-house style doors.
Garage Door Replacement
Replace a damaged, worn-out, or outdated garage door with a new door that fits your home.
Garage Door Opener Repair
Help with openers that hum, click, reverse, or stop responding to the remote, keypad, or wall control.
Garage Door Spring Repair
Help with broken torsion and extension springs — the most common reason a door suddenly becomes too heavy to lift.
Garage Door Cable Repair
Help with snapped, frayed, or loose cables that leave the door crooked, jammed, or hanging unevenly.
Emergency Garage Door Repair
Help when a garage door problem cannot wait — a door stuck open, a broken spring, or a door that will not secure your home.
Where this service is available
This service is available to homeowners in Murfreesboro, TN, and the surrounding service areas: Smyrna, La Vergne, Nashville, Franklin, Brentwood, Antioch, Nolensville, and Lebanon. See the full list on our service areas page.
From the blog
Helpful guides related to this service:
- Garage Door Off Track: Causes and What to Do — An off-track door leans, jams, or stops moving. The cause is usually an impact, a worn roller, or a failed spring or cable — and forcing it only makes it worse.
- Garage Door Rollers and Tracks: Maintenance That Keeps Your Door Moving — Rollers and tracks guide your door every time it moves. A little maintenance and an early replacement can prevent a jammed or off-track door.
- Garage Door Cable Snapped: What to Do Next — A snapped cable leaves the door crooked and jammed, and it puts extra load on the other cable. Stop using the door and call for help.
See all guides on our blog.
Frequently asked questions
It is not advisable. A door that is partly off its track is unstable and can fall, and the springs and cables connected to it are under tension. A contractor can secure the door and re-seat it safely.
Common causes include a vehicle impact, worn rollers, a broken cable or spring letting one side drop, and track brackets working loose over time. A contractor will inspect all of these to find the cause, not just put the door back in place.
Stop using the opener and leave the door where it is. Do not try to force it up or down. Call for service assistance and describe the position of the door and what you can see.
It can. If the opener keeps pulling a jammed door, it can strip its gears or burn out the motor. Unplug the opener if it keeps trying to run, and call for service assistance.
Look along the vertical tracks on each side of the door for dents, kinks, or sections that bow away from the wall. A bent track often shows up as a grinding sound or a door that sticks at the same point every time. A contractor can straighten or replace the damaged section.
Need off-track door repair? Call today.
Call now to speak with a garage door specialist about your door, or get service assistance through our contact page.